|
|
||||||||||||
|
|
||||||||||||
Specifications for NHMP-1225ST & KSP-4806S
Pass Thru Load/Unload
View Floor layout of system (.pdf file
106K)
| 1. Specifications of Process | |
| Workpiece | Sheet-metal |
| Type | Mild Steel, Stainless Steel, Aluminum |
| Size | Max : 1250mm x 2450mm (49.2"
x 96.5") Min : 300mm x 1300mm (11.8" x 51.2") |
| Thickness | Mild Steel: 0.5mm to 3.4mm
(0.02" x 0.134") Aluminum: 0.8mm to 3.4mm (0.032" x 0.134") |
| Pass-line height | 1025mm x 20mm (40.35" x 0.787") |
| Processing time of Loader/unloader | 27sec, (except the time of thickness detector and vacuuming) |
| Control system | MITSUBISHI A-series, PC (Programmable Controller), Operation switches and lamps are built-in control box for Loader/unloader |
| 2. Specifications of Stocker | |
| Number of shelves | 6, 8 or 10 |
| Max. stack height | 215mm (8.46"), including 100mm (3.93") for skid |
| Pallet size | 2500mm x 1300mm (98.4" x 51.2") |
| Material size | Max : 1250mm x 2450mm (49.2"
x 96.5") Min : 300mm x 1300mm (11.8" x 51.2") |
| Max. stack weight | 2000Kg (4,400 lb.) on a shelf |
| Lifter speed | 5.5m/min. (216.5"/min.) |
| Pallet traverse speed | 7.8m/min (307"/min.) |
| LIft drive system | Hydraulic |
| Pallet traverse system | Hydraulic |
| Setting to pallet locate bars | By lift or crane, positioning accuracy required 20mm (0.787") |
| 3. Specifications of Loader | |
| LIft driving system | AC servo motor |
| Loading speed | 80m/min (3,150"/min.) |
| Traverse driving system | AC servo motor |
| Equipment of vacuum | Vacuum pump motor |
| Vacuum pad select | Automatically selected according to material data |
| Thickness detector | Detects thickness according to material data |
| Thickness separator | Magnetic separator and air blow unit |
| Loading guide | LM guide |
| 4. Specifications of Unloader | |
| a. Unloader | |
| Stop point | Center of pallet |
| Unloading speed | 30m/min (1,200"/min.) |
| Driving system | Induction motor (with inverter) |
| Clamping system | Air |
| Aligning conveyor | Plated steel pipe conveyor |
| Conveyor speed | 20m/min (787"/min.) |
| Unloader frame | May be moved manually |
| b. Product Output Cart | |
| Number of output carts | 1, (2 optional) |
| Max. stack height | 400mm (15.7"), including 100mm (3.93") for skid |
| Max. stack weight | 2000Kg (4,400 lb.) on a cart |
| Driving system | Induction motor (with inverter) |
| Lift driving system | Hydraulic |
| Driving speed | 6m/min (236"/min.) |
| 5. Control System | |
| Program designation | max. 100 programs |
| Designation of Product quantity | min. 1 to max. 9999 |
| Designation of material cart | Determined on Schedule screen |
| Schedule | Make schedules on NC controller |
| Cycle stop and re-start | If the customer stops the auto cycle and operates only Turret Punch Press, it is possible to re-start that auto cycle. |
| Designation of loading position | Automatically determined according to material data |
| Thickness designation | Manual input |
| Designation of vacuum pad | Loader automatically selects according to material data |
| Indicator | Displays a comment to identify the cause of an alarm and situation of the machine |
| Automatic power-cut | Standard, set the select switch whether ON or OFF |
Specifications subject to change without notice.
