NISSHINBO / NC MEC USA, Inc. LCM Series CO2 Laser Cutting Machine

PRC 2200	Fast axial flow CO2 laser, power rated at 2200 watts, includes turbo-flow compressor, hyper-pulse, superpulse, circular polarized, high capacity chiller with dual circuit cooling and dust collection system.
PRC 2500	Faxt axial flow CO2 laser, power rated at 2500 watts, includes turbo-flow compressor, hyper-pulse, superpulse, circular polarized, high capacity chiller with dual circuit cooling and dust collection system.
PRC 4000	Fast axial flow CO2 laser, power rated at 4000 watts, includes turbo-flow compressor, hyper-pulse, superpulse, circular polarized, high capacity chiller with dual circuit cooling and dust collection system.

Diode Laser
Alignment Kit
Standard

Diode laser is used for basic beam delivery alignment and can be used as pointing device to assist in locating starting points.

Cutting Head
Maintenance Kit
Standard

Kit includes:

Polish
Acetone (2)
Cotton
1 x Aceram
Focal adjust tool
2 Droppers
5 Nozzles 5" DXN
Optic support (tool)
1 Plexiglass block

5" DXN tool for change
plastic-ring
Demineralized water
Cleaning tissue (2)
1 Electrode cable 5" DXN
1 Tube oxygenoex
1 Ceramic part 5" DXN
1 5" Focal Length Lens

Spare Cutting Head

Complete spare cutting head (specify 5" FL or 7.5 FL)

Optional Laser
Source Layout

Allows the laser power source to be mounted at 90° angle to machine. Includes additional optic.
Allows the laser power source to be mounted parallel to the rear of the machine. Includes two additional optics.
Special space saving layout, laser is mounted over rear of machine.

Quick Pierce

Provides Quick Pierce capability in heavier materials.

Gas Panel

Provides panel and frame for gas bottles, 5 regulators for laser and assist gases, all tubing, fittings and shut off valves.

Air Dryer

Provides clean, dry air for beam path purge.

Electrical Panel

Complete electrical panel includes main disconnect laser, chiller, machine, exhaust and all conduct with wiring via floor.

Electrical Panel
(Exhaust only)

Complete electrical panel for control of Torit Exhaust System.

Work Enclosure

Work enclosure with interlocked Load/unload doors and operation access.

Focus Finder
Standard

Useful to speedily measure the focus position. The distance between the focal point of the lens and the bottom of the nozzle can be read directly from the graduated scale.