YAWEI / NISSHINBO / NC MEC USA, Inc. Hydraulic CNC Turret Punch Press Options

Oil Mist Option	"OIL MIST" increases the performance and life of the tool while improving hole quality. Air and oil are injected into and through the tool by means of a fitting in the ram. The tool must be of the design that allows for the use of this feature. Standard HPI & HPQ Models, Optional HPH Models.

Load / Unload Same Side Option	Load/Unload same side saves floor space, and allows normal access for manual loading of sheets. HPI & HPQ Models Only

Load / Unload Pass Thru Option	Load/Unload Pass Thru option helps reduce material handling. HPI & HPQ Models Only

Same Side L/UL Storage Tower Option	Material storage tower is capable of handling up to six different types and sizes. HPI & HPQ Models Only

Wheel Contouring Standard	Wheel Contouring enables the machine to contour in X, Y, C (auto-index) and R (ram) axis simultaneously using Wilson Wheel™ tooling. This includes hardware, software, turret and work clamp modifications. Wilson Wheel™ is a registered trademark of Wilson Tool International. Patent Pending Standard HPI & HPQ Models Only

4.5" Fixed Station Option	The 4.5” Station Option is available in thick type tooling only. When 4.5” station is added to the turret, one 3.5” station is removed. HPI & HPQ 38 Station Models Only

Ball Table Option	Ball tables provide maximum material thickness support. Optional All Models.

Brush Table Standard	Brush tables help reduce material scratching and noise. This option is a brush only design. Brushes can be replaced when worn, sheet weight is reduced by 50% of normal specification of machine.

Brush/Ball Table Option	Brush/Ball tables incorporate both types of tables for material support and reduced material scratching. Optional All Models.

Pneumatic X-axis Side Gage Option	Pneumatic operated side gage provides quick x-axis gaging of the sheet. Standard HPQ Models, Optional HPI & HPH Models.

Pneumatic Ball Material Support Option	Assist in loading/unloading, large stations in/out (thick tool only). Standard HPQ Models, Optional HPI & HPH Models.

Tool Balancer Option	Assist in loading/unloading, large stations in/out (thick tool only). Standard HPQ Models, Optional HPI & HPH Model.

Programmable Work Clamp Option	Optional HPQ Models.

Slug Conveyor Option	Power conveyor transfers slugs to scrap bin. The unit is "Low Profile" and recommended for stand-alone turret. Optional All Models.

Light Safety Barrier Option	Provides a light curtain type safety zone around perimeter of machine Optional All Models.

Turret Options	26 Station (Standard HPH Model) ½" Ų - 10 1¼" Ų - 10 2" Ų - 2 3 ½" Ų - 2 Auto-index 1¼" Ų - 2 40 Station (Standard HPI & HPQ Models) ½" Ų - 18 1¼" Ų - 16 2" Ų - 2 3 ½" Ų - 2 Auto-index 3 ½" Ų - 2 38 Stations (Optional HPQ Models) ½" Ų - 17 1¼" Ų - 15 2" Ų - 2 3 ½" Ų - 1 4 ½" Ų - 1 Auto-index 3 ½" Ų - 2