The LGS-K Hydraulic shears have been developed with the latest technologies in the field of production and drive techniques.  In addition to high productivity they distinguish themselves because of their sturdiness, simplicity, compactness and modular construction. 

In addition the blade clearance is self-compensating due to the frame structure, making sure that the clearance remains constant over the full length even in the case of a center load.  The blade beam guides require very little maintenance. The backgauge has a standard range of 40" (1000 mm) using linear guides and re-circulating ball screw with a speed of 474"/min (200 mm/sec) and an accuracy of 0.00039" (0.01 mm) and a repetitive accuracy of ±0.001" (0.03 mm) (by means of a closed loop control).  A standard feature of the backgauge is clearance compensation and it retracts automatically when cutting narrow strips.  After changing or grinding the blades, each with two cutting edges, the clearance can be adjusted at the front, which is ergonomic and efficient.

Standard features LGS-K:

• Delem DAC-360 CNC Control
• Programming unit mounted on the front of the machine
• Ball screws used for backgauge movement
• Automatic blade clearance and rake angle setting
• Laser shadow line lighting
• 2 Front support arms
• Squaring guide mounted to left of table
• 2 Measuring scales in the table
• Hold-down cylinders 
• Single or continuous stroke
• Easy blade adjustment mode
• Stainless steel quality blades, each with two cutting edges
• Fine adjustment for precision backgauge parallelism
• Remote movable foot switch and emergency stop switch fitted with armored cable
• Finger guard

• CNC Shear, high precision, streamlined design and easy to use.

• CNC controls shearing angle, shear stroke, blade gap and backgauge.

• Laser shadow line for quick one-piece shearing..
  

Standard Features - Delem DAC-360

The DAC-360 control provides a complete solution for shearing machines. It includes the control of back gauge, cutting angle, stroke length and gap, based on state of the art electronics.

Beside back gauge control, the DAC-360 automatically calculates the required setting for the cutting angle and gap depending on material properties and thickness. The stroke length is limited for minimal production time and related to the material length to cut.

Full pressure control for clamping and cutting
is on board the DAC-360.

With its bright LCD screen a clear and easy operation is offered. The numerical programming is user-friendly and guides the operator through the programming possibilities.

Features of the DAC-360:

Bright LCD screen
Back gauge control
Retract function
Cutting angle control
Cutting gap control
Stroke length limitation
Force control
Manual movement of axes