The LGS-C shears have been developed with the latest technologies in the field of production and drive techniques.  In addition to high productivity they distinguish themselves because of their sturdiness, simplicity, compactness and modular construction. 

In addition the blade clearance is self-compensating due to the frame structure, making sure that the clearance remains constant over the full length even in the case of a center load.  The blade beam guides require very little maintenance. The backgauge has a standard range of 40" (1000 mm) using linear guides and re-circulating ball screw with a speed of 474"/min (200 mm/sec) and an accuracy of 0.00039" (0.01 mm) and a repetitive accuracy of ±0.001" (0.03 mm) (by means of a closed loop control).  A standard feature of the backgauge is clearance compensation and it retracts automatically when cutting narrow strips.  After changing or grinding the blades, each with two cutting edges, the clearance can be adjusted at the front, which is ergonomic and efficient.

Standard features LGS-C:

• CYBELEC DNC 60 CNC Control
• Computer Numerical controlled backgauge
• Programming unit mounted on the front of the machine
• Ball screws used for backgauge movement
• Laser shadow line lighting
• 2 Front support arms
• Squaring guide mounted to left of table
• 2 Measuring scales in the table
• Hold-down cylinders 
• Single or continuous stroke
• Easy blade adjustment mode
• Stainless steel quality blades, each with two cutting edges
• Fine adjustment for precision backgauge parallelism
• Remote movable foot switch and emergency stop switch fitted with armored cable
• Finger guard
• Safety to European CE standard
• Maintenance free top beam slideways
• Foundation plates and anchor bolts
• Automatic blade clearance and cutting angle adjustment
• Automatic blade clearance compensation for the backgauge position
• Rear fence

• Programmable blade cutting length:  This allows the sheet to be cut anywhere along the length of the blades, preventing all the wear taking place on one part of the blades. i.e. thick material can be cut quickly on the far right of the blade.  This can give a longer blade life between turning and regrinding.
• Automatic compensation of the backgauge position:  When the blade clearance is changed the backgauge position is automatically adjusted to give the correct product dimension.
• Adjustment of cutting width:  When the blade rake is changed the stroke length of the top blade is adjusted to maintain the correct cutting width.
• Data storage:  The memory in the control can be used for storage of cutting programs.  This allows the operator to recall often used cutting programs.  It is also possible to store pre-set values in manual mode to recall the most often used values of material type and thickness.  These values can be simple stored and altered by the operator.
• Safety and security:
  • Designed to conform with the European requirements of intrinsic safety, health and welfare (CE)
  • Block hydraulics
  • Rear of the shear guarded by metal screens
  • Visible hydraulic tubes and hoses protected
  • Emergency stop switch on operation console
  • Short-circuit protection in footswitch
  • Key switch to lock the shear off.

• CNC Shear, high precision, streamlined design, linear guide
• They can be adjusted automatically by CNC system: shearing angle, shear stroke, blade gap
• Laser aligning unit, which can scribe-mark on the shearing slope to be sheared
• Imported complete set of hydraulic system from Hoerbiger, Germany, the No. 1 brand name in the world.
  

Adopt the compact hydraulic system of Hoerbiger, advanced structure design, the system pressure control adopt Electri-Hydraulic proportional valve, the system pressure in a whole working period can be controlled by programming to ensure a stable working performance.

- Keyboard with large keys

- Monochrome graphic LCD screen 75 x 130 mm (visable surface) 240 x 128 pixels with automatic contrast correstion.

- Internal SRAM memory

- Flash memory with, in option, uploading possibility of the surface via RS232

Pneumatic sheet support - gauging only